防腐FRP采光板应用于钢结构建筑的优点：
The advantages of anti-corrosion FRP lighting board used in steel structure buildings are as follows:
1）强度高，质量轻，耐冲击性能好。
1) High strength, light weight and good impact resistance.
2）耐老化性能优异。耐腐蚀FRP采光板外表面采用耐紫外线抗老化的MorpIated胶衣处理，内表面采用耐腐蚀的特殊MorpIated胶衣处理，寿命可以期望达到10年-20年以上。
2) Excellent aging resistance. The external surface of the corrosion resistant FRP lighting panel is treated with ultraviolet resistant and anti aging MorpIated gel coat. The inner surface is treated with special MorpIated gel coating with corrosion resistance. The life expectancy can be expected to reach 10 years or more -20 years.
3）美观。耐腐蚀FRP采光板可以做成各种颜色来满足个性化的要求，由于基材和表面Morplated胶衣使用了优质耐褪色颜料，可以保持这种亮丽多彩多年不变。
3) Beautiful. Corrosion-resistant FRP lighting panels can be made into various colors to meet personalized requirements. Because of the use of high-quality fade-resistant pigments on the substrate and surface of Morplated rubber coats, this bright and colorful can be maintained for many years.
4）施工快捷。对于常规的1.5m左右檀距的工业厂房房屋面，可使用3.0mm厚度的板材(波高不低于30mm，波距不大于250mm）直接上人行走施工。但是，出于安全考虑，施工时还是应该避免局部过分集中堆放货施加荷载。板材可以直接用螺栓紧固于次结构上。
4) Quick construction. For the conventional 1.5m sandalwood spacing of industrial workshop floor, 3.0mm thickness of plate (wave height not less than 30mm, wave distance not more than 250mm) can be directly used for walking construction. However, due to safety considerations, it is necessary to avoid overly centralized stacking of goods to impose loads. The sheet can be bolted directly to the secondary structure.