不同的采光板有不同的固定方法。
Different lighting plates have different fixing methods.
采光板采用铝型材扣件固定，波形采光板采用采光板支架和自攻螺钉连接固定，再打胶密封。采光板的位置一般设置在跨中。
The lighting plate is fixed by aluminum fastener, and the wavy lighting plate is fixed by light plate support and self-tapping screw, and then sealed by glue. The position of the lighting plate is generally set in the midspan.
采光板与自攻螺钉连接，必须有盖板。阳光板冷热变形较大,容易被自攻钉剪破，因此阳光板在打自攻钉处应开较大孔。在安装采光板时要考虑采光板的伸缩性。
The lighting panel must be covered with self tapping screws. The sunlight board is bigger in cold and hot deformation, and is easier to be cut by self tapping nails. Therefore, the sun board should open larger holes in self tapping. The flexibility of light panels should be considered when installing daylighting panels.
采光板在12m以内无需搭接，超过12m则需要搭接，搭接长度为200 - 400mm，搭接处施涂二道密封胶，横向搭胶不需收边，纵向彩钢板的搭接需看板型。普通压型钢板，一般不考虚做收边，直接将其与彩板用自攻钉固定，并施涂密封封胶，咬合板则需做收边。采光板纵向流水槽模具 u型槽模具 电缆槽模具 隔离墩钢模具 护坡砖模具 钢制闸门 螺杆式启闭机 卷扬式启闭机长度方向搭接应设置在檀条附近。采光板的常规分类有：经济型，耐候型，隔热型，阻燃型，防腐型五大类型。采光板常用的规格有：750型，840型，820型，980型，950型，900型，475型，760型，以及1m-1.2m宽平板等100余种板型
The lighting plate is no need to lap in 12M, and more than 12m needs lap joint. The lap length is 200 - 400mm. The lap joint is applied to two sealants. The transverse glue does not need to receive the edge. The lap of the longitudinal color plate needs to see the plate type. Ordinary profiled steel plate, generally do not consider the virtual edge, directly with the color plate with self-tapping nail fixed, and apply sealant, the occlusal plate is required to do edge. The longitudinal direction of light panel should be placed near the sandalwood bar. The conventional classification of lighting panels is economical, weather resistant, thermal insulation, flame retardant and anticorrosive five main types. The common specifications of daylighting board are: 750 type, 840 type, 820 type, 980 type, 950 type, 900 type, 475 type, 760 type, and 1 m-1.2 m wide flat plate, etc. more than 100 types