不同的采光板有不同的固定方法。
Different daylighting boards have different fixing methods.
采光板采用铝型材扣件固定，波形采光板采用采光板支架和自攻螺钉连接固定，再打胶密封。采光板的位置一般设置在跨中。
The daylighting board is fixed with aluminum fasteners, and the waveform daylighting board is connected and fixed with daylighting board support and self tapping screw, and then sealed with glue. The position of the daylighting board is generally set in the middle of the span.
采光板与自攻螺钉连接，必须有盖板。阳光板冷热变形较大,容易被自攻钉剪破，因此阳光板在打自攻钉处应开较大孔。在安装采光板时要考虑采光板的伸缩性。钢制闸门 钢坝 保定轻钢别墅 保定平面设计培训 保定室内设计培训 保定办公家具 保定空调维修
The daylighting board must be connected with self tapping screws and must have a cover plate. The sunlight plate has large cold and hot deformation and is easy to be cut by self tapping screws. Therefore, a large hole shall be opened at the self tapping screw of the sunlight plate. When installing the daylighting board, the flexibility of the daylighting Board shall be considered.
采光板在12m以内无需搭接，超过12m则需要搭接，搭接长度为200 - 400mm，搭接处施涂二道密封胶，横向搭胶不需收边，纵向彩钢板的搭接需看板型。普通压型钢板，一般不考虚做收边，直接将其与彩板用自攻钉固定，并施涂密封封胶,咬合板则需做收边。采光板纵向长度方向搭接应设置在檀条附近。采光板的常规分类有:经济型，耐候型，隔热型，阻燃型，防腐型五大类型。
The daylighting board does not need to be overlapped within 12m. If it is more than 12M, it needs to be overlapped. The overlapping length is 200 - 400mm. Two layers of sealant shall be applied at the overlapping. There is no need to close the edge for horizontal overlapping. The overlapping of longitudinal color steel plate depends on the plate type. Ordinary profiled steel plate is generally not subject to virtual edge trimming. It is directly fixed with color plate with self tapping screws and coated with sealing glue. Edge trimming is required for bite plate. The lap joint of the daylighting board in the longitudinal length direction shall be set near the sandalwood strip. The conventional classification of daylighting board includes five types: economic type, weather resistant type, heat insulation type, flame retardant type and anti-corrosion type.