石家庄永磁变频螺杆机知名厂

PC双层阳光板特点

Characteristics of PC double deck sun plate

1、透光性：阳光板透光率最高可达89%，可与玻璃相妣美。UV涂层板在太阳光下爆晒不会产生黄变，雾化，透光不佳，十年后透光流失仅为6%，PVC流失率则高达15%—20%，玻璃纤维为12%-20%。

1, light: sun light transmission rate of up to 89%, compared with the glass phase. UV coated panels will not produce yellowing, atomization and light transmission under the sunlight. After ten years, the loss of light transmission is only 6%, and the PVC loss rate is 15% to 20%, and the glass fiber is 12%-20%.

2、抗撞击：是热塑性塑料中抗冲击性最佳的一种，抗冲击性能是玻璃和有机玻璃的10至27倍。

2, anti impact: it is one of the best impact resistance in thermoplastic plastics, and the impact resistance is 10 to 27 times that of glass and organic glass.

3、防紫外线：阳光板一面镀有抗紫外线（UV）涂层，另一面具有抗冷凝处理，集抗紫外线、隔热防滴露功能于一身。可阻挡紫外线穿过，及适合保护贵重艺术品及展品，使其不受紫外线破坏。

3, anti UV: sun board side is coated with anti ultraviolet (UV) coating, the other side has anti condensation, anti UV, anti dew set insulation function in a body. It can block ultraviolet light through, and it is suitable to protect precious art and exhibits, so that it is not destroyed by ultraviolet.

4、重量轻：比重仅为一般玻璃的1/12，且不易击碎，节省运输、搬卸、安装以及支撑框架的成本。

4, light weight: the specific gravity is only 1/12 of the general glass, and it is not easy to crush, saving the cost of transportation, unloading, installation and support frame.