PC双层阳光板特点 |
添加时间:2018/9/8 14:16:04 浏览次数: |
1、透光性:阳光板透光率最高可达89%,可与玻璃相妣美。UV涂层板在太阳光下爆晒不会产生黄变,雾化,透光不佳,十年后透光流失仅为6%,PVC流失率则高达15%—20%,玻璃纤维为12%-20%。
1, light: sun light transmission rate of up to 89%, compared with
the glass phase. UV coated panels will not produce yellowing,
atomization and light transmission under the sunlight. After ten years,
the loss of light transmission is only 6%, and the PVC loss rate is 15%
to 20%, and the glass fiber is 12%-20%.
2、抗撞击:是热塑性塑料中抗冲击性最佳的一种,抗冲击性能是玻璃和有机玻璃的10至27倍。
2, anti impact: it is one of the best impact resistance in
thermoplastic plastics, and the impact resistance is 10 to 27 times that
of glass and organic glass.
3、防紫外线:阳光板一面镀有抗紫外线(UV)涂层,另一面具有抗冷凝处理,集抗紫外线、隔热防滴露功能于一身。可阻挡紫外线穿过,及适合保护贵重艺术品及展品,使其不受紫外线破坏。
3, anti UV: sun board side is coated with anti ultraviolet (UV)
coating, the other side has anti condensation, anti UV, anti dew set
insulation function in a body. It can block ultraviolet light through,
and it is suitable to protect precious art and exhibits, so that it is
not destroyed by ultraviolet.
4、重量轻:比重仅为一般玻璃的1/12,且不易击碎,节省运输、搬卸、安装以及支撑框架的成本。
4, light weight: the specific gravity is only 1/12 of the general
glass, and it is not easy to crush, saving the cost of transportation,
unloading, installation and support frame. |
上一页 采光板的特点 |
下一页 FRP采光板的优点 |
Copyright © 技术支持:遨游网络