玻璃钢采光板的清洁方法 |
添加时间:2019/11/9 15:46:05 浏览次数: |
玻璃钢采光板的清洁方法如以下: The cleaning method of fiberglass daylighting panel is as follows: 1、玻璃钢采光板清洗时须用60℃以下的温水冲洗。 1. Glass fiber reinforced plastic daylighting Board shall be washed with warm water below 60 ℃. 2、清洗时应用中性洗涤剂,不允许用对玻璃钢采光板有侵蚀作用的洗涤剂。 2. Neutral detergent shall be used during cleaning, and detergent with corrosive effect on fiberglass daylighting board is not allowed. 3、要求用软布或海绵蘸中性液轻轻擦洗。禁用粗布、刷子、拖把等其它坚硬、锐利工具实施清洗。 3. It is required to use a soft cloth or sponge dipped in neutral liquid to gently scrub. It is forbidden to wash with coarse cloth, brush, mop and other hard and sharp tools. 4、当表面上出现油脂、未干油漆、胶带印迹等情况时可用软布点酒精擦洗。 4. In case of grease, wet paint, tape imprinting on the surface, it can be wiped with soft cloth and alcohol. 5、须用清水把玻璃钢采光板清洗下的污垢冲洗干净。 5. Clean the dirt under the glass fiber reinforced plastic daylighting board with clear water. 6、用干净布把板面擦干擦亮,不可有水迹。 6. Dry and polish the board surface with a clean cloth, without water mark. 注意:不适用的清洗剂是碱性溶液、它会侵蚀板面。禁用酯类、酮类、卤代烃类及可使聚碳酸酯溶解。 Note: the unsuitable cleaning agent is alkaline solution, which will corrode the board surface. Esters, ketones, halogenated hydrocarbons and polycarbonates are prohibited. |
上一页 FRP采光板的强度及刚度 |
下一页 农业蔬菜大棚保温采光,公共体育场馆屋面采光 |
Copyright © 技术支持:遨游网络